Hitler’s Mystery Mega-Structures in Central Europe

During the last two years of WWII, the Wehrmacht of Nazi Germany was slowly retreating from the eastern front, pushed back by the mighty blows of the Red Army. The bombing runs carried out by the western Allies from airfields in Britain were systematically hitting most urban centers in mainland Germany and over the territory occupied by the Nazis. It is hard to imagine, but it was in the year 1944, when the destiny of Germany was almost sealed, that industrial production in Hitler’s Third Reich reached an all-time record.

At that time the Germans were desperately short of fuel, raw materials and troops, and their production efforts would not spare them from a complete defeat in 1945. Yet it was in the last stages of the war that some of the most ambitious industrial facilities were designed, built and in some cases made operative before the end of the war.

The driver of the design was in most cases the need to move production lines to secluded and well protected areas, difficult to spot and to destroy through air bombing. As a result, these sites were placed far from urban centers. They were also designed to withstand bombing, by putting them underground, or building them with substantial reinforcement, making large use of one of Nazi Germany’s favorite materials – reinforced concrete.

In this chapter two major sites of this kind are described. One is in southwestern Poland, a region which had been part of the German Empire for long before WWII. The second is in eastern Bayern, today one of Federal Germany’s most prosperous states, close to the border with the Czech Republic. Photographs were taken in late summer 2018.

Navigate this post – click on links to scroll

Sights

Project ‘Riese’, Poland

Construction around this cluster of underground sites started in late 1943, and reportedly lasted until the closing stages of WWII, just days before the Soviets entered the region. The name ‘Riese’ means ‘giant’ in German, and it is surely well suited for this complex, which while far from finished is really striking in size. It was actually composed of at least six major construction sites, which in the intention of their designers should have been developed deeper in the mountains, until a link could be established between them forming a formidable network of tunnels and large halls.

Besides the size and historical meaning of these sites, what makes project ‘Riese’ so fascinating is also the actual purpose of this incredible complex is far from established. Three major theories exist in this respect. The complex might have been intended to be an underground industrial city, a kind of Noah’s Ark for the ‘superior race’ embodied by the top-ranking military and governmental staff of the Reich, or a gigantic secret laboratory for innovative technologies.

What is sure is that the construction was carried out by forced labor, mainly by prisoners of Gross-Rosen concentration camp, just a few miles north of the complex. For the scope, the Nazis created a number of satellite camps next to the entrance of the  construction sites. Rather incredibly, only very scant traces of the project remain in the written records of key figures of Nazi Germany – Albert Speer’s personal diary notably reports some millions marks allocated for project ‘Riese’, and at some point after the war he cited the item resulting from the completion of the construction works, whatever its purpose, as sized to be capable of hosting some tens of thousands people.

Today, six construction sites have been discovered, of which two – Osowka and Rzeczka, the most conspicuous – have been opened to the public, whereas the other are visitable basically for speleologists only.

Osowka

The first visitable site is in the town of Osowka. This site is composed of two parts, one underground with access from the side of a hill, the other close to the top of the same hill.

The underground part can be visited only with a guide. The plant of the completed construction features two accesses, and you will be driven in using the first and out using the other. Between the entrances, the site is mainly composed of an array of parallel tunnels pointing towards the mountain, connected by long halls.

Close to the entrance you can spot a concrete guardhouse with loopholes for machine guns. Some wooden structures like in a mine have been put in place to give an idea of the appearance of the working technique at the time of construction.

Most tunnels have been dug but not reinforced with concrete walls, whereas others are almost complete, showing a peculiar two-level design. The lower level features a smaller section, and the top one a taller, round shaped section.

A feature of the ‘Riese’ complex is a special technique for building the inner concrete coat of the rocky tunnels, producing the distinctive ‘church-ceiling-like’ appearance of some of the halls, with a round shape and frames close to one another.

The Osowka site features also a collection of smaller artifacts, collected from the ground and dating from the construction years, i.e. from late WWII.

Life-size silhouettes of some WWII tanks are on display, to show how the size of these items was totally compatible with the size of the tunnels, in support of a potential use of the site for weapon manufacture.

The outside part, which can be accessed freely, is the most mysterious. At the base of the trail leading uphill you can spot a strange concrete platform, with provision for – possibly – interred pipelines.

Close to the top of the hill you can find a huge concrete platform, with an apparently chaotic ensemble of slots, pipes, handles, stairs and pools. This item has been deemed close in shape to the base of a service building for the valves and pipelines of a power-plant. Theories have flourished in support of the use of this item as a prototype control system for a nuclear power-plant.

The nuclear program of the Nazis, which indeed existed and is even documented to some extent, is shrouded in mystery for what concerns the actual findings obtained during the war. These dark spots are also due to the destruction of most of the hardware connected with the program everywhere in Germany, and with the inherent secret nature of the program itself. No evidence exists of the Osowka site in the public papers about the nuclear studies of the Reich, so the true purpose of this object is likely to remain an unsolved riddle.

Close by this platform, you can find an original concrete building, part of the same construction plan. It is pretty long, with large windows, and likely intended for troops or technical staff.

Rzeczka

Compared to Osowka, this site is more centered on the inside part. Again, there are two entrances, close by a creek on the side of a hill, providing access to a network of tunnels. Similar to Osowka, close by the entrance you can find guard-houses in concrete. These were built soon, possibly for keeping a watch on the forced workers.

The construction works in Rzeczka were less advanced than those in Osowka. Yet thanks to the lack of the concrete coat, you can appreciate the size of the tunnels, some of which are really tall.

There are small collections of artifacts found in the tunnels, and an original concrete room offers a description of all discovered sites of the ‘Riese’ project.

A 1:1 copy of a V-1 German flying bomb has been placed in one of the tunnels, to show the compatibility of the size of this weapon with the tunnel. Such weapons were reportedly assembled in underground facilities elsewhere in Germany.

Visiting is again possible only with a guide. Some multi-media experiences with sounds, lights and voices are included in the tour, but these are not so impressive for those who don’t understand Polish.

On the outside, you can spot some relics from construction years, including trolleys, and concrete slabs watermarked with symbols of the local construction companies tasked with the practical realization of the site. There is also a copy of a V-2 rocket, operative in the last months of WWII but little effective in changing the fate of Nazi Germany.

Getting there and moving around

As pointed out, the sites connected with project ‘Riese’ are many, but most of them are not visitable unless to specialists and with the help of a speleologist. On the other hand, the two sites of Osowka and Rzeczka are professionally operated as primary tourist attractions. The distance from these two sites is about 20 minutes by car, so you can surely arrange the tour of both sites on the same day, with much spare time in your daily schedule.

At Osowka you can find a large parking and a fully equipped visitor center, where you can book a guided tour, or join a departing one – the only way to get inside. Please note that the number of people admitted on each tour is relatively small, so I would suggest booking at least one day in advance through their website (partly also in English) to be sure to get a place at the time you like. They offer several different tours. The most complete include a visit to a part of the underground site which can only be accessed by boat. This is given only on some days by reservation, and only for groups. The standard tour of the inside is offered several times a day.

The guided may turn out really boring, cause you are provided an audio-guide in English with explanations lasting a couple of minutes for each of the circa ten stops, in face of the Polish-speaking guide talking about 5 minutes per site. You may try to spend your spare time taking good pictures, but even though groups are relatively small, they tend to obstruct the view inside, leaving poor chances for acceptable shots. Furthermore, lighting is not very good, so a tripod would be recommended, except you don’t have the time and chance for undisturbed long poses. Therefore, if you are interested in top-level pictures, you would better arrange a dedicated tour out of the normal touristic offer. Otherwise, you’d better go prepared to a difficult visit.

The outside part of the site is less frequented and more rewarding. It can be reached in about ten minutes following a pretty steep, unpaved trail in the trees. This part is unfenced and unguarded.

The Rzeczka site has only an inside part, which can be visited only on a guided tour. You can join one of the frequent tours they provide even without reservation. There is a small visitor center and plenty of parking space. Similar to Osowka, the guide will speak in Polish, and you are provided an audio-guide in English. The visit lasts less than in the case of Osowka, and the audio-guide explanations are more proportionate to the speech of the Polish-speaking guide, making for a more enjoyable visit. The multi-media experiences are of little relevance for non Polish-speaking people. Outside you can find also some panels with explanations on the history of the site in both Polish and English. Website with some info in English here.

The tunnels in Rzeczka are poorly lighted too, so photographing will be difficult unless with a tripod, but the conditions are not very favorable for operating with a tripod – many people around and short times between stops along the tour.

‘Weingut I’ Aviation Industry Complex, Germany

The giant complex known as ‘Weingut I’, the original codename attributed by the Nazi staff at the time of its design and construction, is the direct result of a plan to relocate all major industrial production lines of the Reich to protected areas, far from the line of the front and from any major urban center. In this particular case, the new factory was intended to shelter the production line of the new Junkers Jumo 004 jet engines for the ‘Schwalbe’ – also known as Messerschmitt Me-262, this was the first jet fighter in the world to be pushed into service, back in 1944.

The huge factory was designed based on a basic module made of a reinforced concrete arch, some 250 ft open, 100 ft tall and 10 to 15 ft thick. This item was to be built on site and partly buried under ground level. Twelve such modules were needed for the complete hangar, with a total intended length of the factory of around 1.200 ft. Of the planned twelve sections, seven were actually built between mid-1944 and the end of the war.

Despite the intended scope was that of hiding the factory to protect it from aerial reconnaissance, due to the size of the construction works the object was reportedly spotted by US aircraft, but not attacked. Actually, the special construction was tested against explosives by the US Army after the war, resulting in the collapse of all modules except one, which is still standing today besides the pretty sizable relics of the others.

The site is not actively guarded, but it is located in a regional nature preserve, so access is through a nice walk in the trees. Once next to the hangar you can find multiple access points.

Close to the main arch, the only one still standing, it is possible to find an explanatory panel in German only. It commemorates also the forced laborers from the nearby concentration camps, who had to take part substantially in the construction works.

Walking under the arch is at your own risk, cause despite the bulky appearance of the structure, smaller pieces of concrete are hanging from from the ceiling. However, a walk inside will give you the most striking impression of the size of the hangar.

Just nearby the remaining module to the west you can find a walkable, half interred bunker, likely with a technical function which is today hard to imagine.

The module still standing today is the westernmost of the hangar, so walking east you will have the chance to step on the roof of the demolished modules. A number of thick iron rods can be spot at ground level.

Walking along the former southern side of the hangar, you can spot a deep well, probably part of the construction strategy. It may have been used to take out the gravel from beneath the base of the arches to lower them to a rest position on more compact ground.

Along the same side you can find a way to walk below the fallen structure. You can also get a view of the edge of one of the modules.

The eastern end of the complex is probably the most hazardous, cause you find an unprotected concrete cliff a good 10 ft high, constituted by the edge of a fallen module.

All in all, the place is a nice example of the undeniable structural design abilities of the German military, really interesting to visit both from a technical viewpoint and as a witness of the utopian visions of the Nazis, which unfortunately cost the lives of many.

Getting there and moving around

Reaching the trail-head is very easy by car. Leaving Mühldorf am Inn for Waldkraiburg along the road St2352, about 0.5 miles south of the crossing with St2550 you will find a sizable gravel factory to your right, preceded by an unpaved road taking west in the trees. You can park on the unpaved road on the northern side of the factory – probably a heir of the original factory built to feed the construction works of the hangar.

From there, you should take the unpaved trail into the trees, closed to vehicle traffic. It is another 0.5 miles to the site, on a flat and easy trail. A quick scan of the Google map will allow you to plan the trip. The place is not remote, cell phones work and you may use a virtual map to get oriented on site. Visiting might take about 2 hours for a very interested subject, including the trip from the parking and back, plus all time needed for pictures .

Hitler’s Wonder Weapons in Northern France

Following the end of the Battle of Britain, mainly fought in the air in summer-fall 1940, the plans of the Axis for an invasion of Britain were halted and progressively updated and reconfigured. The successful invasion of Holland, Belgium and Northern France had led to a stabilization of the border of the Axis territory on the Atlantic coast of Europe earlier in 1940. Since then and until the counter-invasion by the Allied troops in June 1944, the military command of Germany decided for the fortification of the coast with the Atlantic Wall, a series of naval gun batteries, ammo storages, barracks, radar stations, command and communication centers, and everything else that was needed to detect and contrast an attack from the West, both from the sea and from the air.

But the coast of the Atlantic was not considered only as a border line to be defended. Some large-caliber cannons of the Atlantic Wall built in the region of Calais on the narrowest sector of the English Channel, were capable of hitting targets on British mainland. Furthermore, many port towns on the cost of France were converted into military ports from where the Kriegsmarine operated regularly with various material, including the famed underwater U-Boot forces, running offensive missions against all sorts of Allied ships in various sectors of the North Sea and the Atlantic ocean. Airbases were routinely operated in the regions of Northern France, Belgium and Holland both for bombing raids over Britain and later for fighting missions in defense of the occupied and the innermost territories of the Reich from the Allied bombing runs. With the help of the US, these began to systematically target the Axis in 1943, operating from Britain.

Finally, the newest and most advanced conventionally armed weapons of WWII started to be operated from the coastal area in 1944 by the German armed forces. The famous ‘Retaliation Weapons’, or ‘Vergeltungswaffen’ in German – from which the famous abbreviation ‘V’ of the V-1, V-2 and V-3 – suffered from limited range, and so had to be launched from close enough to their intended target – Britain, by design. Today some relics of the launch sites and some buildings connected with the deployment of such ordnance can be visited when touring the area of the Pas-de-Calais, the northernmost province of France.

The following photographs, taken in summer 2016, portray four notable sites of the kind in that region.

Navigate this post – Click on links to scroll

Sights

V-1 – Ardouval

Since 1943 new weapons enriched the arsenal of the German armed forces. The famous V-1, manufactured as Fieseler-103, reached operational readiness and began to be deployed that year. This relatively simple, subsonic, air-breathing – i.e. non-rocket-propelled – flying bomb, while not very accurate, could be deadly against large target cities like London. Its limited range forced deployment in the occupied territories closest to Britain.

Many launch bases were prepared in Northern France, from where Southern England was well within range. The V-1 was used only after the D-Day – the first registered operative launch was on June 13th, 1944, against Britain. By the end of Summer 1944 the Allied had pushed the Germans roughly back to the region of the Ardennes in Northeastern France, on the border with Belgium. Consequently, all bases in Northwestern France were silenced. Later in the war, V-1 were still launched against liberated Belgium and central England, from more inland and further north bases by the retreating German forces. Total launched V-1 were actually in the order of the tens of thousands.

The Ardouval site is possibly the only V-1 site officially opened to the public in France. It is an open-air museum with no fences, so it is open h24 every day of the year. The site was severely hit before by Allied air raids before it could enter service, so no flying bomb was ever launched from it. Actually, the bomb craters can be clearly spotted in the trees all around. Going far from the paved walkways is not advised due to danger of unexploded ordnance.

The installation is rather extensive, and traces of some original buildings and service roads remain to this day. Among them a concrete water basin, a generator building, a building with a concrete arch for aligning navigation instruments prior to the launch.

Two curved trails from the V-1 body storage to the operational buildings and launch ramp can be spotted. The launch ramp was reconstructed, but just besides you can see the launch observation bunker, with a slot for visual checking the launch from very close to the lower end of the inclined ramp.

Barely recognizable ruins of other buildings can be spotted as well. Touring the place is not complicated, thanks to an explanatory panel close to the parking. It is advisable to take a picture of it with your phone, to be sure to see everything the site has to offer. Time required is about 45 min.

Getting there and moving around

The site of Ardouval (Val Ygot) is located close to the town of Ardouval and Pommeréval. It can be easily reached by car from the latter, less than 2 miles from the town center, driving west on the D99. Large free parking on site.

V-2 – Watten & Wizernes

Much more advanced than V-1, the V-2 was the first operational rocket in the world. Invented by the team of Wernher von Braun and tested in Peenemünde, on the border between today’s Germany and Poland, this liquid-propelled rocket came in the latest stage of WWII. The production totalled around 5000 units, and about 3100 were actually launched during the war, basically only from mobile launch platforms. Targets were mainly Belgium and Britain, but the first successful launch took place against Paris in September 1944. As for the V-1, range was among the weaknesses of the design, so that a deployment close to the Atlantic coast was necessary for targeting Britain from mainland Europe.

Mobile gantries were well designed and allowed a relatively fast re-deployment, a critical feature in the last stage of the war when the frontline was moving eastward at fast pace. Despite that, Hitler’s personal preference was with huge, autonomous, fixed launch bases, for which design and construction work began soon after the occupation of Northern France.

Two sites were created. The first was close to Watten, in the forest of Eperlecques – about 40 miles from the coast to the south-east of Calais – and was codenamed ‘Kraftwerk Nordwest’. Work on this monstrous bunker – probably the largest you will ever see from this age – started in early 1943 in a forest, at ground level and with little natural defences.

This installation was designed for the assembly of V-2 rockets arriving by train, and for supplying them with oxygen prepared in place in a dedicated branch of this bunker-factory. The intended role of this installation was the creation of a ‘rocket revolver’, capable of launching rockets at a frequency of 1.5 per hour, 24 hours a day. The Allies did not overlook the potential strategic relevance of the site and bombed it repeatedly. During a raid carried out by US forces in summer 1943 the site still under construction was seriously damaged. Since then it was decided to turn it into a liquid oxygen production factory for supplying other launch sites. Soon after the disembarkment, the place was finally abandoned after being hit by Tallboy bombs by the British. After capture in September 1944 it was decided to further demolish it by testing several new ordnance against a target so hard to crack.

The site is open as a regular museum, which can be visited on self-guided tours. A trail in the trees leads you to the main bunker, the tallest part of which can be entered. A V-2 mockup allows you to appreciate the proportions of the building. Some of the tunnels can be seen from the outside.

Also in place are a V-1 launch ramp, cannons and vehicles. Time required for visiting may vary between about 30 minutes to more than 1 hour depending on your level of interest.

The second site was built starting mid-1943 close to Wizernes, and not far from the previous site in Watten. This was codenamed ‘Schotterwerk Nordwest’, and it was intended for the same basic scope of the other, but it had also to be built to avoid heavy damage from air-dropped bombs. The location was extremely favorable, making use of a former quarry, with tunneling in the body of a U-shaped hill. A distinctive feature still remaining today is the concrete dome covering part of the site. The place was stricken with usual and Tallboy bombs after the D-Day. This caused the collapse of the entrances to the tunnel system, and of the side of the hill. The dome moved and banked to on side, but notably it did not break apart.

The place is open as a major documentation center. Besides the usual IMAX theatre in a building close to the parking, you can visit on a self-guided tour both the tunnels in the side of the hill and the area below the concrete dome – it can be incredibly hot and suffocating there, where it’s cold in the tunnels. You can find here much information about the history of the site and more in general of the deployment of the V-1 and V-2 in the area. A complete visit without the IMAX may take 45 minute to 1.5 hours depending on your interests.

Getting there and moving around

Both sites are easily reachable by car. The site of Watten is located is about two miles west of the town. You can reach it driving west on the D207 from the crossing between D207 and D300. A road called Rue des Sarts takes to the right after about .6 mile. The local name of the place is ‘Le Blockhaus d’Eperlecques’.

The site of Wizernes is located on the D210 about 1 mile south of Wizernes. The local name is ‘La Coupole’ – the Dome’.

Both sites are clearly signed.

V-3 – Mimoyecques

The hatred against the indomitable British enemy reached a pinnacle with the deployment of the V-3, reportedly Hitler’s favorite, a supercannon capable of shelling London from a distance of around 100 miles. The installation in Mimoyecques, close to Cap-Gris-Nez, about 8 miles southwest of Calais, was single-targeted against the ‘symbol town’ of London, for the cannon could not be oriented – it was built inside a hill and pointed upwards in a fixed attitude. The design was based on the older idea of multiple-charged shells, i.e. shells which were accelerated gradually to a very high target speed while running along an exceptionally long (430 ft) barrel. The site in Mimoyecques, codenamed ‘Bauvorhaben 711’, by design accommodated 25 such barrels, allowing the battery to shoot at the very high rate of 10 shells per minute, all the day round. The tunnel was designed to allow a train entering it.

Work on the site began in summer 1943, but the site never reached completion and was severely hit in summer 1944 by Allied bombing raids. President Kennedy’s elder brother reportedly died in an accident on one of them. It is noteworthy that the novelty and originality of the design disoriented Allied intelligence, who did not understand the role of the installation before capture in September 1944.

The concept of supercannons, albeit never provedly succesful from an operational viewpoint, was destined to emerge again in recent history, with a similar installation proposed by Iraqi dictator Saddam Hussein and designed with the help of a Canadian company – its manager being reportedly killed by the Mossad to hamper realization.

Together with the other ‘V sites’, Mimoyecques was almost completely demolished in order to avoid any further strategic use. It is reported that Winston Churchill in person pushed for this, to the aim of preventing the yet-to-be-established government of France from any action against Britain – some speculate that what the Prime Minister likely feared was the establishment of Communist rule in France.

This is site is not so famous as the V-2 sites, and not similarly ‘institutional’, yet there are opening times. You can go on a self-guided tour of the tunnels, where you can find many explanatory panels, as well as a reconstruction of one of the barrels. It’s always too warm for me, but I must say this time it was incredibly cold inside… The visit may take 30-45 minutes. Guided tours are available in French.

On the outside, just besides the tunnel entrance you can find a steel plate once on top of the site armouring the outlets of the barrels. The concrete construction on top of the place lies on a private property. I could only take one pic before being forced to withdraw…

 Getting there and moving around

The area is very nice, with the lovely Cap-Gris-Nez and Cap-Blanc-Nez a few miles away. The site can be reached on the D249 between the small towns of Bainghen and Landretun-le-Nord. Large free parking on site.

Inside the World’s Largest Aircraft – Antonov 225 Mriya

I am not sure this post does fit in the ‘sightseeing’ category. If you go to Malpensa – the largest airport of Milan – on a regular day, it’s unlikely you will spot the distinctive shape of the unique six-engined Antonov An-225. Yet in this post I will give a pictorial description of this crazy flying machine, so that wherever and when you should see the Mriya, here is what you might expect. This aircraft is a moving attraction, so exceptional that I feel going out to photograph it is still ‘sightseeing’ in some sense…

I had the chance to climb on it one night in early 2015, thanks to Paolo, a friend of mine from Italy, who is working in the company operating the airport system of Milan. The huge aircraft had been going in and out of Italy on an almost regular basis for some weeks, tasked with moving military equipment from central Africa back to the Italian soil.

It was a matter of coordination between me and Paolo, and of course some luck was involved, for the landing and take-off times of the Mriya are usually in the middle of the night and not perfectly predictable, plus good weather is never assured especially in winter. Anyway, in the end I succeeded in arranging a private visit to the Mriya with Paolo and another friend of mine. Paolo registered us as official visitors, so being there and allowed to walk on the apron of the largest airport in Northern Italy, we could come close also to some other interesting items.

The following photos are about that incredible night.

Sights

Mriya Parked

When we went on the apron the plane was still resting on its many (32) wheels, with doors closed and nobody around. The flight scheduled for that evening was basically a ferry flight to Africa, so no loading operations were expected. We were free to walk around taking pictures.

You may see how big this aircraft is by comparing its size to that of the guys walking under it. You will feel like walking close to a moored cruising ship more than an aircraft…

Air India Boeing 787 Dreamliner

While waiting for the crew to come to the aircraft for departure, we came close to a Dreamliner preparing for a flight to India. It still retained its ‘new plastic’ smell. Among the most distinctive features of this model are the beautiful engine nozzles, with a toothed profile for noise suppression.

Emirates Airbus A380

We had the chance to see an A380 taxiing to the gate after arriving from Dubai. This double-decker is really impressive, as you can see again looking at the size of the people walking under its wings. Yet this time this was not the star of the show…

We walked up to the cabin, but were not allowed to take pictures. As it is the case for most modern aircraft, the cockpit is not so fascinating especially when the electronics are switched off – you just have an array of TV scopes…

Inside the Mriya

We then went back to the Mriya to meet the crew and walk in. The crew is composed by about ten people, including those connected with flight operations and those responsible for payload.

You get access to the aircraft through a hatch with an attached ladder. Otherwise, when the cargo door to the front is open, you may access the aircraft from there. There is no cargo door to the back.

The inside is structured with a main cargo deck in the central section of the aircraft, with a built-in crane capable of moving a 5 ton load. There are apparently no hooks on the ground, they possibly fasten the payload to the sides, but I’m not sure. The tail cone section can be accessed through an internal hatch for inspection, and cannot host any payload.

Along the sides of the cargo bay there are tons of bulky items and tools for servicing, spare parts including wheels, gauges connected with the landing gear operation, and small round windows to allow visually checking the wings and the engines underneath. The main cargo section is closed to the front by the folding platform for cargo loading, resting in a vertical position in flight, when the nose cargo door is closed and the nose cone lowered.

A retractable ladder gives access to the cockpit and crew resting area, which is configured in a similar fashion to the upper deck of the Boeing 747. To the front from the hatch on top of the ladder you get access to the seats of the flight engineers and to the cockpit. Seating in the engineering compartment is for four people, but I guess this was necessary for operating the Buran or for more complicate missions. Anyway, I would say at least a crewman for each side would be needed for normal flight operations. Seating in the cockpit is for two, and the arrangement of controls and gauges is neat and linear.

I would have spent one month in the engineering compartment to check every item in detail – tons of late Cold War items, and everything so Soviet-looking! – but this was not a day-off visit for the crewmen, who were busy with preparing the aircraft for the flight. To the back of the access hatch the quarters for the crew include two side compartments for living and sleeping, a small galley and a large storage room. From there it is possible to look through a window to another compartment to the back, with clusters of electronic material and other stuff, close to the wing section.

I noticed the usual placard with evacuation routes, and other strange knobs close to the upper-deck access ladder. Close to the side door of the aircraft the crew has many stickers from various places visited with this wonderful aircraft, and a bell like that of a 19th century ship!

Boeing 747 Cargo

Waiting for the Mriya to depart, we boarded a brand new Boeing 747 cargo of the Russian company ABC cargo. The contrast between this and the Antonov couldn’t be more striking. This new 747 has a fully automatic cargo deck, with a really impressive plethora of sensors and a system of rails to safely fasten cargo pallets. The flying deck is very comfortable and modern, with the typical brownish Boeing plastic, clearly reminding you this aircraft was ‘proudly manufactured in the USA’!

Mriya Leaving

We finally went back to the Mriya to follow the departure sequence. The aircraft was pushed back with a dedicated towing strut, coping with the twin-mast front undercarriage. This item travels with the aircraft, so before engine startup it is necessary to open the front cargo door and load this gear, pushing it inside by pure handwork. The front undercarriage is tilted, lowering the front of the plane and making loading operations possible. After that, a crewman closes the side access door and startup of the six engines is initiated.

I shot a video during engine spool up, posted on my YouTube channel broadbandeagle.

Note

As I wrote at the beginning, this is a ‘special report’ and not a post with many how-to notes. I hope you got an idea of how the An-225 looks inside, but I was clearly lucky to be allowed on this special tour. All thanks go to Paolo, who invited me to join in, registering me as an official visitor. I dare to say that if you don’t know somebody doing his job and with his passion for aeronautics, then unfortunately you’ll hardly have a chance to board this aircraft and see the inside… unless you do his job yourself, or they retire the aircraft and put it in a museum!