Base Tuono – Cold War Surface-To-Air Missiles in Italy

Just like West Germany, post-WWII Italy found itself on the border with a communist dictatorship, Marshal Tito’s Yugoslavia. Even though Tito and the government of the USSR were never close friends, from the viewpoint of the western alliances Yugoslavia represented a potential threat.

This mistrust was also a result of the aggressive policy Yugoslavia had adopted against Italy after WWII, imposing the cession of a piece of traditionally Italian territory in the northeast part of the country as a war compensation. This had triggered a significant migration of the local population, who was trying to escape from communism to mainland Italy and abroad. This added to the bitterness of the Italian-Yugoslavian relationship, to the point that the new border was not formally settled until the 1970s.

Italy was among the founding members of anti-communist NATO in 1949. This meant the chance to take part in a coordinated defense effort against the eastern bloc. Among the tangible results of this cooperation was the adoption of American war material, including aircraft and, as soon as they became a reliable war asset, missiles.

Considering air defense, besides a number of manned aircraft, the airspace of western Europe was protected by two defensive lines of surface-to-air missiles (SAM) extending roughly from the North Sea to the area around Venice on the Mediterranean. This was studied especially to counteract bombing raids carried out by a great number of enemy bombers simultaneously attacking from the east. This huge defense system was based on the US-designed Nike and Hawk missile platforms, and deployment started in the late 1950s.

SAM installations in Italy comprised the low to intermediate altitude Hawks, with a quick reaction capacity against low-level intruders. These were managed by the local Army. High altitude Nike-Ajax and later Nike-Hercules missiles were operated by the Italian Air Force against high-altitude targets, typically bombers. New dedicated groups were established since 1959, trained in the US to work with the new missile platform. At its height, the Nike force in Italy counted on 16 such groups, apparently corresponding to as many launch bases.

Concerning the effectiveness of the Nike defense line, it soon became obsolete, in the sense that a significant part of the strategic deterrent was transferred to ICBMs by both the NATO countries and the USSR. As a result, SAM defensive lines conceived against aircraft intrusion and low-level attacks would turn out more useful than the high-altitude and high-yield Nike-Hercules. As a matter of fact, all Nike platforms were deactivated in Italy and everywhere in Europe by the early 1980s, well before the end of communism in Europe.

Following deactivation, most bases, stripped of all hardware of any value, were simply locked up and abandoned. In Germany very few traces of this extensive system remain to this day (see this post). Together with the US, Italy is possibly the only country where this fragment of military history is documented through the active preservation of one of the former SAM launch bases.

The Nike-Hercules base preserved in Italy is called ‘Base Tuono’ – ‘tuono’ meaning ‘thunder’ in Italian language – and was operated between 1966 and 1977. It is in a gorgeous mountainous setting in the northeastern Alps, about an hour from the little town of Trento. After years of disrepair, a part of it has been refurbished with original material and opened as a beautiful, partly open-air museum, where you can get a lively impression of how the base would have looked like in the years of operations.

The following photographs are from a visit to ‘Base Tuono’ in Autumn 2018.

Sights

Nike batteries were composed of two connected but geographically separated areas, an integrated fire control area (IFC) and a launch control area (LCA). In the first resided the electronic aiming part, comprising all the antennas and electronic gear necessary to collimate the target, compute the expected kill point of the missile, and to track and guide the missile to that point. The launch area was composed of an array of three flat concrete pads, each supplied with a hangar for storing the missiles, gantries for putting typically three missiles at a time (per pad) in launch position, and a concrete shelter to oversee and trigger the launch sequence. An extensive description of the Nike SAM system can be found on this excellent dedicated resource website.

Due to the features of the radar guidance system, the IFC had to stay in line of sight from the LCA, and at a higher – but not excessively higher – elevation. At ‘Base Tuono’, due to the mountainous setting, the two areas are not far, yet they are not easily accessible from one another. Furthermore, what remains today of the former base is all concentrated in the launch area. One of the three original pads – ‘Alpha’ – has been preserved, where the other two – ‘Bravo’ and ‘Charlie’ – and other ancillary buildings as well, have been completely demolished, and a water basin can be found in their place. All installations and housing in the former control area on top of a local peak – Mount Toraro – have been wiped out, but you can get an impression of the original plan of this part of the base walking around on your own.

Launch Control Area

The launch pad ‘Alpha’ is the focus of the museum. Approaching from the parking, which is located close to the site of the former barracks and canteen, you can spot from the distance three Nike-Hercules missiles aligned in vertical launch position. A water basin covers a large part of the former base, as you can see from historical pictures. Launch pads ‘Bravo’ and ‘Charlie’ are totally gone, similarly to the original outer fence delimiting the large perimeter of the installation.

Getting closer to the launch pad ‘Alpha’ you can notice an array of radar antennas, which were originally in the IFC area on top of Mount Toraro. The area of the launch pad features a reconstructed inner fence, which was in place around each pad in the original base.

The pad is basically rectangular in shape, with a hangar on one side, a protection rim and the launch control bunker on two opposing sides and a free side where today you can find the ticket office.

Three missiles are placed on top of their launch gantries. The gantries are part of a sophisticated rail system, designed to allow an easy side motion of the missiles from inside the hangar to their respective launch positions outside. The missiles were stored horizontally in the hangar to the far top of the rail on trolleys. When being readied for launch, the trolleys were pushed along the rail to the launch position, where the trolley was joined to the gantry. The missiles were raised to a vertical attitude together with the trolley with the help of a lift, which was a movable part of the gantry.

While the pavement is covered in asphalt, you can see the gantries and the rail system are staying on hard concrete foundations. These are among the few remains you see in the German Nike site covered in this post.

Inside the hangar you can spot a Nike Hercules missile, with lateral cutouts to expose the inner structure. These reveal the four-canister solid-propellant booster stage, which was ignited first and was separated from the bullet-shaped second stage when exhausted. The latter features the warhead, the electromechanical rigs of the guidance system, and a single solid-propellant sustainer rocket engine. The rocket had a range of about 25 miles, and a top speed over Mach 3, making it a really remarkable piece of technology especially compared to the soviet counterparts of the time.

All around the missile in the hangar you can see inner parts of the missile itself and of the ground fire control system as well. There are also panels with the history of the base, and original warning signs and instructions painted on the inner walls of the hangar – and similarly on other walls of the base. These writings are in double language, both in Italian and English. While the base was managed by the Italian Air Force, such installations were integrated in the NATO defense line, so many procedures of the Italian Air Force were in English. Furthermore, US military staff was required on site ‘by design’ in case of operations with nuclear warheads, which the Hercules could optionally carry. Nuclear warheads were never deployed to this base though.

Further items on display around the three missiles on the open apron include an old Nike-Ajax missile, a Lockheed F-104 Starfighter – the Italian Air Force was the last in the world to retire this model from service, as late as 2004 – and two trailers aligned in a row. The trailers are the battery control trailer, or BCT, and the radar control trailer, or RCT. Both trailers were originally in the IFC area of the base, and were operated by the staff responsible for offensive operations. In the days of operation, there was always somebody on duty in the trailers.

The BCT is, roughly speaking, where targets were designated, the kill point computed and the launch sequence triggered. The most notable feature are the two computerized plotting boards used to identify the target and to define the flight trajectory of the missile. The LOPAR detection radar and the identification friend-or-foe (IFF) radar reported information to this trailer, which coordinated the attack.

In the RCT stood the operators of the TTR and TRR radars, which were responsible for keeping trace of the target and for monitoring the missile during the flight towards the designated kill point.

To the back of the two trailers, it is possible to spot the rectangular shapes of the LOPAR radar and of the smaller IFF radar. The two round-shaped antennas are the TTR and TRR radars. In many pictures they are portrayed inside a bulbous cover, conferring them a distinctive spherical shape.

The concrete bunker to the opposite side of the launch pad with respect to the trailers is a protected room for the launch section panel, which is a kind of control panel for triggering the launch sequence of the missiles. The bunker served as a shelter for the operators of the launch section, for remaining on the outside in the vicinity of the missiles during launch operations was extremely dangerous.

During the guided visit, you are given a demonstration of the launch sequence from inside the control room, which is insulated from the outside with double tight doors. The firing procedure was quite complicated. Actually, it was a direct signal traveling along a cable connection from the battery trailer that gave the go to the missiles. Yet there were redundancies for increased safety, and it was possible to trigger the entire launch sequence from within the firing section, in case communication with the BCT was lost. During normal operations, the OK from the operator of the control panel in the bunker had the function of a further go/no go safety layer for the launch.

A trailer with a panel similar to that in the bunker can be found outside. This likely represented a further redundancy, or like the F-104 it is a piece coming from somewhere else.

To the back of the bunker with the fire section panel you can find an original watchtower from a US base in northern Italy, similar to the towers originally in place around the missile base. Close by, there is a nice example of the canisters used to the transport the stages of the Nike-Hercules, as well as the crane used to assemble it. There is also a further example of the second stage of the missile.

Getting there and moving around

The ‘Alpha’ battery of the launch control area is open as a museum, called ‘Base Tuono’. It is located on the road SP143, which departs from Folgaria, a small town about 12 miles south of the regional capital town Trento. You can find clear roadsigns leading to the site from Folgaria.

The museum has opening times, visiting is generally possible on a self-guided basis. Access to the bunker and the trailers is possible only on guided tours. All information on their website (in English). Large free parking about 0.2 miles away from the entrance.

There is much to see for technically minded subjects, but the visit will be surely appealing for children too. I would recommend to allocate at least 45 minutes for the visit, and up to 2 hours if you want to take a guided tour and take all the pictures on your own. The scenery around is gorgeous, so it will be easy to combine this destination with a nature trail or with other tourist destination in the area.

Integrated Fire Control Area

This is where the radars and trailers used to stay, together with barracks and service buildings. It can be found about 2 miles south east direct line of sight from the launch pad, on top of Mount Toraro. Differently from the launch control area, this area has been demolished and sanitized. No buildings remain in place, yet some of the former foundations and platforms to anchor the trailers can still be seen.

Reaching to the top of the peak is interesting to appreciate the view of the launch site from here. Unfortunately, at the time of my visit low clouds obstructed the sight.

Getting there and moving around

Even though the wide original road to reach this part of the base still exists, for some reason access to the top of the mountain is not allowed by car. In order to get to the trailhead from the museum, you can take your car and keep going southeast along the SP143 for about 1.5 miles. As you go ahead, the road will change the name to SP92 on your nav. Soon after the road starts descending, you will find the trailhead to your right, with a horizontal obstacle and a prohibition sign for cars. You may park there. It is likely the trail to the top of Mount Toraro will be on your nav too, for it is basically a normal road. The distance to walk to the top is about 1 mile, along the former service road to the base – covered in asphalt, gently ascending, no risk of any kind.

Flying over Moosehead Lake & Lobster Lake, Maine

Probably not so famous for bush-flying activity as other locations on the West Coast, especially British Columbia and Alaska, the easternmost state of the US – Maine – has still much to offer in this sense. Besides the beautiful coast going from Portland to the famous Acadia National Park and the border with New Brunswick, the central and northern part of the state are totally wild areas, with few roads and many lakes, forests, wildlife and breathtaking panoramas you can appreciate from the air.

Similarly to the Rockies in the West, the Appalachians constitute an ideal backbone of all states in the North-East of the US. Of course, being far elder than their western counterparts, the Appalachians seem less massive and their peaks are not so high, yet the almost isolated domes of the last mountains of this range in Maine make for very unusual sights.

The wild features of this land, as in other parts of the US and Canada, make it a perfect place for bush flying and related photo opportunities. Determined to explore this part of the country from the air, in a party of three we found a nice company to fly with, with a base in the nice town of Greenville, ME.

The following photographs were taken during our stay there in 2011.

Getting there

We booked with Currier’s Flying Service – website curriersflyingservice.com. The planes of this company are all beautiful floatplanes, and in summer they can be spotted resting on water in a protected cove – named ‘West Cove’ – on the western border of the town of Greenville, the largest town on the shores of Moosehead Lake.

The small nice wooden terminal of the company is clearly indicated and can be found besides the main road (West Street), just before passing a railway bridge leaving from downtown Greenville heading for N.15 and Quebec City.

Sights

We had booked in advance via phone, and we were greeted by Sue, the wife of the owner, Mr. Roger Currier, who is also the pilot. We profited of a short time waiting for Mr. Currier to have a look at his incredible mechanics shop and hangar, which looked like it had come out of a National Geographic’s documentary or a book on open range explorations!

Besides an array of radial engines, including one with a fully assembled two-bladed propeller, we could see a hangared Cessna 195 on floats – Mr. Currier owns two of these, we flew on the other white and blue painted one -, a canoe, a historic small truck, and tons of engine parts, propellers, deer antlers, tools and cabinets. Going to the nearby pier, we could see the other aircraft belonging to the company, the Cessna 195 we were to fly on – I had expressly asked for this, due to the extreme rarity of this model on a world scale -, a modern Cessna 180 Skywagon, and a larger and nice De Havilland Beaver, a more common site in the Northwest, as Kenmore Air operates some on a regular timetable even from downtown Seattle.

After meeting with Mr. Currier we boarded the 195, with me in the front right seat – I am a pilot, so I’m often offered the first officer’s seat on similar occasions, just in case! This aircraft has only one yoke, which can be shifted to the left or to the right, leaving the not-in-command seat with much room. This and the fact that 195 has a high wing with no struts, similarly to the Centurion and Cardinal models, make this airplane a perfect choice for observation and photography missions. Those in the front seats enjoy a great lateral visibility, but the huge radial engine limits the view to the front, at least on water – things improve a bit in flight.

Furthermore, the two seats in the back are arranged in a saloon configuration, with much legroom and very good, unobstructed visibility to the sides – optimal for photography.

We taxied on water to the north for a while and took off to the south, making a left U-turn over Greenville and setting course again to the north. Another seaplane hangar, larger than that of Courier, can be spotted close to the center of Greenville. It used to be the home base of another flying service company, named Folsom, once famous for operating one of the few Douglas DC-3 on floats ever manufactured. Also the hangar of Jack’s Air Services can be spotted nearby.

Following the eastern shoreline of Moosehead Lake stationing at a 1600 ft above sea level, hence at a convenient zoom-lens distance to the ground, I could take pictures of the many coves and bays, including Sandy Bay, Lily Bay and Spencer Bay. From the photographs, it is clear that soon after leaving Greenville you really get into the wild. Looking east you can see in the distance mount Katahdin, the easternmost peak of the Appalachians.

Approaching Spencer Bay you get a beautiful close view of the Spencer Mountains and Spencer Pond.

Further north we reached Lobster Lake, again a wild area.

Turning west and then south we moved along the western shore of Moosehead Lake. I faced the sun in this part of the flight, and the plexiglass canopy didn’t help with the light, so the pictures are a bit blue-filtered. The most prominent feature of this second part of the flight was Mount Kineo, with the distinctive knife-cut shape, and Kineo Cove nearby.

Getting closer to Greenville we could spot some beautiful homes with direct access to the water, some with a floatplane moored nearby.

Touching down on water is not softer than landing on a runway – this was my first time – but the aircraft stops quite more rapidly than on a runway.

After landing Mr. Currier set off for another trip with two couples from Florida on the Beaver, taking off to the north.

Before leaving Greenville we had a stop by the Folsom hangar and by the local general aviation airport, where we found Folsom’s famous DC-3. The plane has been converted to the usual wheeled configuration. Furthermore, it looks damaged, resting in a marked right-banked attitude.

The flight took about an hour, a very enjoyable experience I would surely recommend if you are visiting this part of the country!

Flying over Mt. Rainier and Mt. St.Helens

Among the most famous sights in Washington State, these two mountains are aligned along an ideal north-south line developing from Seattle down towards the Oregon border. Similarly to most of the West Coast, the area is a section of the Pacific Ring of Fire.

Actually, Mt. St.Helens did explode with a spectacular eruption in 1980, revealing its real deadly nature. What may be worrying is the similarity between the isolated peak of Mt. St.Helens and some other mountains in the area, like Mt. Hood, Mt. Adams and the highest and most prominent of all, Mt. Rainier. It is likely these – and other – formations around the areas of Seattle and Vancouver may turn out to be ‘privileged points’ for an eruption some day…

In the meanwhile, they are very characteristic spots in the beautiful, uncontaminated landscape surrounding the nice area of greater Seattle.

Being fascinated with the natural beauties of this area, and also with aviation – as you might guess from this website of mine! – we set off in a party of three with the idea of exploring Mt. Rainier and Mt. St.Helens from above.

Surfing the web I noticed there are several companies offering tours of the area in front of Seattle. Actually, the region is a small ‘angle of paradise’ for those with a thing for general aviation and small-scale air transport, especially seaplanes. Kenmore Air is one of the few remaining commercial companies offering regular services from downtown Seattle to the islands around with some good old De Havilland one-engined, propeller-driven seaplanes!

Being interested not just in taking off and making a couple of circles around downtown Seattle, I had to dig something more, making sure to avoid some always-present tourist traps – being a pilot myself, I knew a bit of the likely cost of the flight I was looking for, so I could easily spot traps. I finally found a very good solution with Fly Seattle Scenic (website here).

I contacted Rick Dominy, a certified commercial pilot and a nice guy operating his beautiful Cessna 210 Turbo Centurion for that company, and we met directly at Renton airport – the quarters of this small company are to the west of the airfield, besides the general aviation apron. We agreed on the flight plan, which would go to Mt. Rainier eastern side, Mt. St.Helens, with multiple circles over the crater, and back to Renton passing to the western side of Mt. Rainier.

We paid and boarded the aircraft. Turbo 210 is a 310 hp beast of a Cessna, not the usual 150 or 172 training aircraft, despite some basic similarities with the latter in the layout. Rick’s exemplar is in perfect shape. The cabin is very roomy and clean, we were all given intercom headphones, I was seated in the co-pilot seat – just in case… – and having a high wing with no lift strut below and a retractable landing gear, unlike more basic Cessnas the view to the side and downwards is absolutely unobstructed – perfect for enjoying the view and taking photographs!

Here follow some photos of this flight (August 2012).

Sights

First a look to the aircraft and around Renton, just a few miles south of downtown Seattle, close to Tacoma Airport. Renton is where another branch of Boeing has its hangars. You can see many brand new 737s, still unfinished. This branch is pretty large. The airport at Renton is also a base for general aviation activity, like Fly Seattle Scenic.

Following takeoff we turned south towards Mt. Rainier, which could be already seen in the distance, about 35 miles South. While climbing we could enjoy the beautiful landscape of Washington State, with an embarrassing high number of small airports around.

Mt. Rainier is about 14400 ft, and the top part of it is surrounded by several distinct glaciers. We approached from north and we passed by the eastern side of the mountain. The bottom part is very nice with woods and small mountain lakes.

Among the ice rifts on the eastern side of the peak we could spot two huts, with ‘ant-people’ moving along trails on the icy surface. We flew over the large parking by the trailhead for some of the trails climbing to the top of Mt. Rainier.

Leaving Mt. Rainier towards the south we could already spot Mt. St.Helens, some 50 miles away. Between these two isolated peaks, again a nice wild landscape, mostly pine woods. The crater of Mt. St.Helens is not symmetrical, cause the volcano exploded towards the northern side of the mountain. Approaching from north, we could see inside the crater very well. The scenery is very different from around Mt. Rainier, with almost no vegetation even at lower altitudes were the eruption hit more violently. All trees were wiped out and the soil became too acid for regrowth.

Still today, many of the trunks of the trees pushed away by the eruption are floating on a lake at the bottom of the peak. Approaching the southern rim of the crater we spotted more ‘ant-people’, taking a rest after reaching the top of the volcano.

The rocky dome in the middle of the crater is still exuding some worrying vapors… The summit is about 8300 ft, so there are snow and small glaciers also here.

After some circles over the lake and crater, we set our course again for Mt. Rainier, first overflying the valley of Hoffstadt Creek, where the snow which was melted by the volcano generated a flood at the time of the eruption, which somewhat reshaped parts of the valley. Today some dams regulate the flow of the creek.

The western side of Mt. Rainier appears to be the steepest, again with various glaciers perfectly visible. They are much larger than they might seem in the photographs!

Past Mt. Rainier we descended rapidly towards sea level, heading for our home base. The landing was perfect. Just before it, we had a glance at SeaTac and downtown Seattle from the distance.

This was an unforgettable experience I recommend for everybody in the area. The flight takes about 2 hours. We were definitely very lucky with the weather – Rick told us we had selected for our visit one of the two weeks of good weather people from the area are allowed per year! If you are similarly lucky, don’t miss this wonderful attraction!