Herdla Torpedo Battery – Defending Bergen in WWII and the Cold War

Despite overshadowed by the natural beauties of Norway, the heritage of the rich war history of this Country would really deserve a dedicated trip. Thanks to its geographical location, this Scandinavian Nation had a primary strategic role both in WWII and the Cold War.

Hitler’s Third Reich military forces conquered Norway early in WWII (Spring 1940), gaining an effective stronghold for launching sea and air patrolling missions over the Norwegian Sea and the northern Atlantic. The long coastline stretching from the Skagerrak strait up to North Cape was made impenetrable to enemy invasion, building anew a capillary network of fortifications – the Atlantic Wall. This masterpiece of military engineering was based on an extensive catalog of reinforced concrete standard elements (Regelbau in German), ranging from fortified casemates to radar towers, to observation and target range finding stations, to bunkerized gun batteries, etc. These elements were assembled in larger fortified compounds, placed in key strategic locations along the coast or in the narrow firths reaching to major ports and towns, like Bergen or Trondheim.

Typically run by the Kriegsmarine (Navy) or Luftwaffe (Air Force), these forts may comprise measuring stations, anti-shipping guns, anti-aircraft cannons, plus barracks, services, ammo storages, and even airfields in some cases. They were built not only in Norway, but having been originally planned by the Third Reich to protect the entire coast of conquered continental Europe, they were erected along the shoreline also from Denmark down to France.

As a matter of fact, many of the Norwegian fortresses of the Atlantic Wall rank today among the most massive and well-preserved of the entire line (see here for some highlights).

But the war history of Norway, and of its mighty military infrastructure, didn’t stop with the end of WWII. With the start of the Cold War, Norway became a NATO founding member, and once again of great strategic value. It found itself in close proximity to the USSR, and with a long coastline facing the sea corridor taking from the highly-militarized Murmansk and Kola Peninsula (see here) to the northern Atlantic.

Most of the Atlantic Wall forts, especially anti-shipping and anti-aircraft gun batteries, were obsolete by the 1950s, and were soon deactivated. Some were abandoned or, when retained by the Norwegian military, they were modified to cover new functions.

In a few cases, the original mission of the site by the Third Reich was retained by NATO forces in the Cold War. This is the case of the torpedo battery in Herdla.

The fortress of Herdla was a major strategic fort in the Atlantic Wall, allowing to keep a watch on the entry point to the inner waters leading to the large industrial and military port of Bergen. Thanks to the morphology of the area, featuring a rare spot of flat land nearby a steep and rocky cliff, an airfield was installed by the Third Reich besides a set of bunkers, effectively hidden in the rocks. A land-based torpedo battery, consisting of a range-finding and aiming station and torpedo-firing tubes, was part of the fort.

During the Cold War, it was decided that the torpedo battery could be still a valuable asset, and Herdla was retained by the Norwegian military – by comparison, the airfield, too short for the requirements of the jet-era, was not. Over the years, the torpedo battery was potentiated to keep up-to-date against the technological offensive capabilities of the Eastern Bloc, and to exploit the most modern identification and surveillance techniques.

The torpedo battery was part of a larger naval fort, which controlled also the barrier of sea mines implemented to stop a sea-based intrusion towards Bergen.

As a matter of fact, the area control functions and the offensive capability of Herdla were retained until the early-2000s, when the fortress was deactivated following the end of the Cold War and defense budget cuts.

Luckily however, the often neglected Cold War chapter of warfare history has in Herdla a valuable asset – an accurately preserved fortress regularly open for a visit. A modern visitor center welcomes the more curious travelers, leaving Bergen towards the remoteness of the coast. It retraces the WWII heritage of the Herdla site, thanks to an exhibition centered around an original Focke-Wulf FW190, recently salvaged from the bottom of the sea, and with a special history to tell. Then a visit to the battery, looking like it had just been left by the military staff, is a unique emotion for both the specialized war technology enthusiasts and the general public as well.

The following report and photos is from a visit taken in Summer 2022.

Sights

As outlined in the overview, the Herdla site today is centered on two major highlights. One is the visitor center, with the preserved relic of a unique Luftwaffe Focke-Wulf FW190. The other is the former torpedo battery and Navy area command bunker, Norwegian facilities installed during the Cold War in bunkers dating to the Third Reich era.

Visitor center & Focke-Wulf FW190 exhibition

The relic of a Focke-Wulf FW190 A-3 German fighter from WWII is hosted in a dedicated room, where a scenic lighting makes this impressive exhibit literally shine.

This exemplar of the iconic Third Reich fighter, produced in some thousands examples, and now almost impossible to find especially in Europe, is ‘Gelbe 16’ (which can be translated in ‘Yellow 16’) of 12./JG5, and its history is deeply related to Herdla.

It took off on December 15th, 1943, from the airfield the Luftwaffe had established on the flat area now lying ahead of the visitor center, at the time a very active German airbase.

Following troubles with the engine, it ditched in the cold inner water near the island of Misje, some ten miles south of Herdla, the pilot being able to abandon the doomed aircraft, and being saved by local fishermen – and returned to the Luftwaffe, who had a Norwegian resistance prisoner released in acknowledgment.

The aircraft sank to the bottom of the sea, but its memory was not lost by some of the locals, who clearly remembered the events. The Focke-Wulf remained there for 63 years, but it was finally located and pinpointed by the Norwegian Navy, instigated by local interest, in 2005. After preparatory work – including exploration dives, to assess the condition and to set-up recovery operations – the fairly well-preserved wreck was lifted to the surface on November 1st, 2006, and loaded on a tug. Conservative restoration work then took place in Bergen.

Instrumentation and the machine guns were all recovered, together with many further fragments of equipment. Interestingly, evidence of repaint was found during conservation, retracing some previous assignments. Yet the history of this very exemplar remains difficult to write in its entirety.

Finally, following completion of conservation works, a new home for the aircraft was prepared in Herdla, where a hangar was built anew – and this is where you can see it today.

The aircraft is in an exceptional state of conservation, considering it spent 63 years in sea water. The fuselage, wings and tail are not significantly damaged, with just some paneling having disappeared on tail control surfaces, due to corrosion. The swastika on the vertical stabilizer is still perfectly evident, like other painted details.

The propeller blades are all bent downstream, as typical for an emergency landing carried out without the landing gear and the engine still running. The tail wheel is there with its original tire, the emblem of the German brand ‘Continental’, still in business today, being clearly noticeable.

The instrumentation from the pilot’s control panel has been put on display separately. Also a gyroscope has been found. Everything is only slightly damaged. Similarly, the two machine guns, dismounted prior to lifting the aircraft from the sea, are little damaged, and displayed with some ammo.

Complementing the exhibition are a few other pieces from other wrecks, as well as some quality scale models and dioramas portraying Herdla in the days of Third Reich tenancy.

Torpedo Battery

Access to the torpedo battery, which was built in WWII just above sea level, is from a gate on the land side. From outside, the bunkers in the fortress of Herdla appear especially well-deceived in the rocks of the cliff.

What is seen today inside, however, dates to the years of Norwegian tenancy. The facility was updated in several instances during the Cold War, the last in the 1990s. Immediately past the gate, you get access to a modern and neat mechanics shop, where a partly dismounted torpedo allows to have a suggestive look inside this marvelous weapon.

Interestingly, Norway inherited and went on operating a significant number of German G7a (TI) torpedoes. This was the standard torpedo employed by the Kriegsmarine since 1934, and with some modifications (‘TI’ standing for ‘first variant’, the later variants bearing other codes), for the full span of WWII.

Propulsion power for this torpedo was from a piston engine, fed by high-pressure vapor obtained by the combustion of Decaline with compressed air stored onboard, mixed in a heater (i.e. a combustion chamber) with fresh water, similarly stored in a tank. The resulting mixture fed a 4-cylinder radial piston engine, driving two counter-rotating propellers. The exhaust in the water produced a distinctive contrail of bubbles, and the presence of a high-frequency moving mechanism had the side-effect of a significant noise emission. The head of the cylinders can be clearly seen in the dismounted exemplar.

Guidance was provided by rudder steering controlled with the help of gyros, whereas depth was controlled via a mechanical depth sensor. The torpedo could stay close to the surface or keep an assigned depth. In WWII the torpedo had no homing device – i.e. it was ‘blind’, thus requiring carefully putting it on a target-intercept trajectory. It could however cover pre-determined trajectories of some sophistication. The set-point selection for guidance and the yaw regulation gyro assembly have been taken out of the torpedo, and can be checked out in detail.

The range could be selected before launching, and was traded off with speed. It could be between 5.500 and 13.200 yards, and the speed ranged between 44 kn and 30 kn correspondingly. The German origin of the torpedo on display is betrayed by the writings in German on some parts.

Leaving the workshop through a gate towards the inner part of the bunker, a roomy supply storage area can be found, with some interesting material including torpedo parts, as well as a torpedo launching cannon.

This item represents the primary way of launching torpedoes in the early Cold War from land-based batteries or ship decks. This was a technology inherited from WWII, when coastal batteries of the Atlantic Wall ejected torpedoes from slots in the bunker wall, shortly above the surface of the water, employing cannons similar to this one (which dates from the Cold War period), thanks to a burst of compressed air. This cheaper, but less ‘stealthy’ and accurate launching procedure, was replaced by underwater launching tubes only over the years of the Cold War, featuring an increase in the level of sophistication of warfare. Correspondingly, the slots in the side of the torpedo battery bunker facing the water were bricked up, and torpedo cannons were retained mostly for use from the deck of warships.

From the storage room you get access to the core area of the battery. This is through a decontamination lock, with gear for anti-contamination testing, including paper strips for checking contamination from poisonous gas.

The battery features two diesel generators for electric power, employed in case of disconnection from the regional grid.

Less usual – for a military facility – is the presence of two air compressors. Compressed air is relevant for torpedo operation, being employed for the launch burst from the torpedo tube, as well as for propulsion and gyros in the G7a torpedo. The air compressors in Herdla are made by Junkers, solid German technology from 1961!

A few bunkerized resting rooms for the staff manning the battery can be found in the same area, besides the power/compressed air supply room and the torpedo room. The resting rooms are minimal as usual, with suspended berths, and much personal military equipment on display – coats, blankets, medical kits, and more technical material.

Finally, the core of the battery is the torpedo room. This is much longer than wider, access is via the short side. In the Third Reich years, the launching slot was on the short side to the opposite end of the room, right above the water. Today, this slot has been bricked up, and there is no window at all.

The torpedoes are aligned on racks along the long sides of the room. The launching system is via two underwater tubes, which are accessed via obliquely mounted hatches, one to each side of the room at the level of the floor. The section of the racks closer to the entrance door is actually a pivoting slide. The slide could be pitched down, thus allowing the torpedo to slip through the hatch in the firing tube. The original launch control console can be found to the right of the access door – in a mint condition, it looks really like it had just been put in standby following a drill!

Over the years, the stockpile of G7a TI torpedoes was upgraded especially in terms of guidance. The major modification was the adoption of wired control. This is based on a thin electric cable unwinding as the torpedo proceeds along its trajectory, keeping it linked with the launching battery. This upgraded model is called G7a TI mod 1. Control via a steering joystick and trajectory monitoring system could provide manual guidance to the torpedo, thus sharply increasing the chance of target interception. This technology is still in use today. Wire tubes can be found on top of the rudder of torpedoes.

Besides the G7a, Herdla battery received the TP613 torpedo, a weapon developed in Sweden in the early 1980s from previous designs. Exemplars of this torpedo, still in use, are visible in the torpedo room. In terms of mechanics, the piston engine of this torpedo is powered by the reaction of alcohol and Hydrogen-peroxide. In terms of guidance, this torpedo features improved wired communication for guidance and power setting (i.e. changing torpedo speed during the run), as well as passive sonar homing. A dismounted section exposing the engine can be found on display.

The wire tube installation on top of the rudder is featured also on this model, and examples of the wire are on display.

The original guidance console, made by Decca, with a prominent joystick on it, is on display as well!

Training and proficiency checks are typically carried out without a warhead, but with an instructional head. Distinctively painted in shocking red, and with powerful lights in them – to show their position to simulated targets during training exercises, when needed – these are on display in a number. Since the torpedoes, just like missiles, are very expensive, a way of recovering them after instructional use has been envisioned, in the form of inflating bags coming out of the head, increasing the buoyancy of the emptied torpedo and forcing it to surface when reactants tanks are empty and power is off.

Offensive warheads can be exchanged with dummy ones for training, bolting them to the body of the torpedo, which remains totally unchanged. A warhead with a 600 lbs explosive load, triggered by a proximity pistol, was typically put on G7a torpedoes. The proximity pistol was made of four petals, which on contact with the target were bent towards a conductive metal ring around the nose cone of the torpedo, closing an electric circuit and triggering the explosion.

Leaving the torpedo room and the bunker is via the same way you came in.

Sea Mines & Area Control Center

But your visit is not over. As mentioned, the Herdla coastal battery hosts an area control center, with provision to manage target detection facilities and the minefields in the waters around Bergen.

This part was built in a facility strongly potentiated with tight doors, typical to the shockwave-proof military construction syllabus of the Cold War. A sequence of roomy vaults carved in the rock hides a number of containerized modules, together with an exhibition of sea mines and related apparatus.

Most notably, an L-type Mk 2 moored mine and a Mk 51 bottom mine are on display, with a understated control panel. The latter is actually a portable controller for triggering the mines. Already before WWII, sea mines were often put on the bottom of the sea in shallow waters, or moored in deeper waters, to control access inner waters, firths, ports, etc. The Germans made extensive use of this technique in Norway, and following WWII this strategy was inherited by Norway to protect its waters from (primarily) Soviet intrusion.

Despite contact mines were still popular in WWII, they have been surpassed and gradually replaced already in that age by proximity mines, based on noise and – especially – magnetic sensors. Today, proximity fuses activated by the magnetic field of ships or submarines passing nearby are standard technology. Onboard electronics allows to distinguish between the magnetic signature (i.e. fingerprint) of different ships, thus avoiding any issue for civilian or friendly traffic, and activating only against enemy shipping. Degaussing techniques – i.e. the ability of military ships to hide their signature – have forced to improve detection technology, which is today extremely sophisticated.

Furthermore, for the protection of ports and friendly waters, sea mines are typically controlled and triggered by hand, upon detection and localization of enemy shipping, by means of dedicated detection facilities on land or water. This improves precision and allows more flexible defensive-offensive tactics, since a human chain of command has control on the minefield, instead of a pre-determined computer program.

To trigger the mines, consoles like that on display are employed, where a trigger for each mine allows precise control over the minefield.

The first containerized control center hosts a similar, yet much more modern, dedicated console. Everything in this movable control center is very neat, and really looking like reactivation might take place in just moments! Of interest is also the situation map, covering the area around Herdla and the water inlet to Bergen.

A nearby container reveals berths and a small living area for stationing staff.

Yet another container hosts a complete situation room covering the area. Similar to the coastal battery in Stevnsfort, Denmark (see here), a careful eye was constantly overlooking the shipping in the area.

In the same container, a console for steering torpedoes, more modern than that previously seen in the torpedo battery, is on display.

All in all, Herdla is a one-of-a-kind destination, of primary interest for those interested in Cold War military history, enjoyable and easy to visit. Totally recommended for everybody with an interest in history, with much to see and learn for the kids as well.

Getting there & Visiting

Herdla fortress features an official visitor center with a large parking area, and amenities including a small restaurant and a shop. The official website is here. It can be reached about 27 miles north of central Bergen, roughly 45 minutes by car. The address is Herdla Museum, Herdla Fort, 5315 Herdla.

The torpedo battery and control bunker can be visited only on a guided tour. Visiting from abroad, we scheduled an appointment, and were shown around by the very knowledgeable guide Lars Ågren, a retired officer of the Royal Norwegian Navy. He joined the Navy in the late 1970s, in time to gain a substantial, hands-on Cold War experience during the final, high-tech part of that confrontation. He was promoted to tasks in the NATO headquarters in Belgium, later returning to Norway, and totaling more than 37 years in service. He is strongly involved in the management of the Herdla site. Chance is for you to embark on a visit with this guide, or other very competent guides who will satisfy the appetites of more committed war technicians and engineers, being capable of entertaining also the younger public as well.

A visit to the torpedo battery and control center may last about 1 hour. Seasonal changes to opening times may apply, as common in Northern Countries, therefore carefully check the website.

Hitler’s Mystery Mega-Structures in Central Europe

During the last two years of WWII, the Wehrmacht of Nazi Germany was slowly retreating from the eastern front, pushed back by the mighty blows of the Red Army. The bombing runs carried out by the western Allies from airfields in Britain were systematically hitting most urban centers in mainland Germany and over the territory occupied by the Nazis. It is hard to imagine, but it was in the year 1944, when the destiny of Germany was almost sealed, that industrial production in Hitler’s Third Reich reached an all-time record.

At that time the Germans were desperately short of fuel, raw materials and troops, and their production efforts would not spare them from a complete defeat in 1945. Yet it was in the last stages of the war that some of the most ambitious industrial facilities were designed, built and in some cases made operative before the end of the war.

The driver of the design was in most cases the need to move production lines to secluded and well protected areas, difficult to spot and to destroy through air bombing. As a result, these sites were placed far from urban centers. They were also designed to withstand bombing, by putting them underground, or building them with substantial reinforcement, making large use of one of Nazi Germany’s favorite materials – reinforced concrete.

In this chapter two major sites of this kind are described. One is in southwestern Poland, a region which had been part of the German Empire for long before WWII. The second is in eastern Bayern, today one of Federal Germany’s most prosperous states, close to the border with the Czech Republic. Photographs were taken in late summer 2018.

Navigate this post – click on links to scroll

Sights

Project ‘Riese’, Poland

Construction around this cluster of underground sites started in late 1943, and reportedly lasted until the closing stages of WWII, just days before the Soviets entered the region. The name ‘Riese’ means ‘giant’ in German, and it is surely well suited for this complex, which while far from finished is really striking in size. It was actually composed of at least six major construction sites, which in the intention of their designers should have been developed deeper in the mountains, until a link could be established between them forming a formidable network of tunnels and large halls.

Besides the size and historical meaning of these sites, what makes project ‘Riese’ so fascinating is also the actual purpose of this incredible complex is far from established. Three major theories exist in this respect. The complex might have been intended to be an underground industrial city, a kind of Noah’s Ark for the ‘superior race’ embodied by the top-ranking military and governmental staff of the Reich, or a gigantic secret laboratory for innovative technologies.

What is sure is that the construction was carried out by forced labor, mainly by prisoners of Gross-Rosen concentration camp, just a few miles north of the complex. For the scope, the Nazis created a number of satellite camps next to the entrance of the  construction sites. Rather incredibly, only very scant traces of the project remain in the written records of key figures of Nazi Germany – Albert Speer’s personal diary notably reports some millions marks allocated for project ‘Riese’, and at some point after the war he cited the item resulting from the completion of the construction works, whatever its purpose, as sized to be capable of hosting some tens of thousands people.

Today, six construction sites have been discovered, of which two – Osowka and Rzeczka, the most conspicuous – have been opened to the public, whereas the other are visitable basically for speleologists only.

Osowka

The first visitable site is in the town of Osowka. This site is composed of two parts, one underground with access from the side of a hill, the other close to the top of the same hill.

The underground part can be visited only with a guide. The plant of the completed construction features two accesses, and you will be driven in using the first and out using the other. Between the entrances, the site is mainly composed of an array of parallel tunnels pointing towards the mountain, connected by long halls.

Close to the entrance you can spot a concrete guardhouse with loopholes for machine guns. Some wooden structures like in a mine have been put in place to give an idea of the appearance of the working technique at the time of construction.

Most tunnels have been dug but not reinforced with concrete walls, whereas others are almost complete, showing a peculiar two-level design. The lower level features a smaller section, and the top one a taller, round shaped section.

A feature of the ‘Riese’ complex is a special technique for building the inner concrete coat of the rocky tunnels, producing the distinctive ‘church-ceiling-like’ appearance of some of the halls, with a round shape and frames close to one another.

The Osowka site features also a collection of smaller artifacts, collected from the ground and dating from the construction years, i.e. from late WWII.

Life-size silhouettes of some WWII tanks are on display, to show how the size of these items was totally compatible with the size of the tunnels, in support of a potential use of the site for weapon manufacture.

The outside part, which can be accessed freely, is the most mysterious. At the base of the trail leading uphill you can spot a strange concrete platform, with provision for – possibly – interred pipelines.

Close to the top of the hill you can find a huge concrete platform, with an apparently chaotic ensemble of slots, pipes, handles, stairs and pools. This item has been deemed close in shape to the base of a service building for the valves and pipelines of a power-plant. Theories have flourished in support of the use of this item as a prototype control system for a nuclear power-plant.

The nuclear program of the Nazis, which indeed existed and is even documented to some extent, is shrouded in mystery for what concerns the actual findings obtained during the war. These dark spots are also due to the destruction of most of the hardware connected with the program everywhere in Germany, and with the inherent secret nature of the program itself. No evidence exists of the Osowka site in the public papers about the nuclear studies of the Reich, so the true purpose of this object is likely to remain an unsolved riddle.

Close by this platform, you can find an original concrete building, part of the same construction plan. It is pretty long, with large windows, and likely intended for troops or technical staff.

Rzeczka

Compared to Osowka, this site is more centered on the inside part. Again, there are two entrances, close by a creek on the side of a hill, providing access to a network of tunnels. Similar to Osowka, close by the entrance you can find guard-houses in concrete. These were built soon, possibly for keeping a watch on the forced workers.

The construction works in Rzeczka were less advanced than those in Osowka. Yet thanks to the lack of the concrete coat, you can appreciate the size of the tunnels, some of which are really tall.

There are small collections of artifacts found in the tunnels, and an original concrete room offers a description of all discovered sites of the ‘Riese’ project.

A 1:1 copy of a V-1 German flying bomb has been placed in one of the tunnels, to show the compatibility of the size of this weapon with the tunnel. Such weapons were reportedly assembled in underground facilities elsewhere in Germany.

Visiting is again possible only with a guide. Some multi-media experiences with sounds, lights and voices are included in the tour, but these are not so impressive for those who don’t understand Polish.

On the outside, you can spot some relics from construction years, including trolleys, and concrete slabs watermarked with symbols of the local construction companies tasked with the practical realization of the site. There is also a copy of a V-2 rocket, operative in the last months of WWII but little effective in changing the fate of Nazi Germany.

Getting there and moving around

As pointed out, the sites connected with project ‘Riese’ are many, but most of them are not visitable unless to specialists and with the help of a speleologist. On the other hand, the two sites of Osowka and Rzeczka are professionally operated as primary tourist attractions. The distance from these two sites is about 20 minutes by car, so you can surely arrange the tour of both sites on the same day, with much spare time in your daily schedule.

At Osowka you can find a large parking and a fully equipped visitor center, where you can book a guided tour, or join a departing one – the only way to get inside. Please note that the number of people admitted on each tour is relatively small, so I would suggest booking at least one day in advance through their website (partly also in English) to be sure to get a place at the time you like. They offer several different tours. The most complete include a visit to a part of the underground site which can only be accessed by boat. This is given only on some days by reservation, and only for groups. The standard tour of the inside is offered several times a day.

The guided may turn out really boring, cause you are provided an audio-guide in English with explanations lasting a couple of minutes for each of the circa ten stops, in face of the Polish-speaking guide talking about 5 minutes per site. You may try to spend your spare time taking good pictures, but even though groups are relatively small, they tend to obstruct the view inside, leaving poor chances for acceptable shots. Furthermore, lighting is not very good, so a tripod would be recommended, except you don’t have the time and chance for undisturbed long poses. Therefore, if you are interested in top-level pictures, you would better arrange a dedicated tour out of the normal touristic offer. Otherwise, you’d better go prepared to a difficult visit.

The outside part of the site is less frequented and more rewarding. It can be reached in about ten minutes following a pretty steep, unpaved trail in the trees. This part is unfenced and unguarded.

The Rzeczka site has only an inside part, which can be visited only on a guided tour. You can join one of the frequent tours they provide even without reservation. There is a small visitor center and plenty of parking space. Similar to Osowka, the guide will speak in Polish, and you are provided an audio-guide in English. The visit lasts less than in the case of Osowka, and the audio-guide explanations are more proportionate to the speech of the Polish-speaking guide, making for a more enjoyable visit. The multi-media experiences are of little relevance for non Polish-speaking people. Outside you can find also some panels with explanations on the history of the site in both Polish and English. Website with some info in English here.

The tunnels in Rzeczka are poorly lighted too, so photographing will be difficult unless with a tripod, but the conditions are not very favorable for operating with a tripod – many people around and short times between stops along the tour.

‘Weingut I’ Aviation Industry Complex, Germany

The giant complex known as ‘Weingut I’, the original codename attributed by the Nazi staff at the time of its design and construction, is the direct result of a plan to relocate all major industrial production lines of the Reich to protected areas, far from the line of the front and from any major urban center. In this particular case, the new factory was intended to shelter the production line of the new Junkers Jumo 004 jet engines for the ‘Schwalbe’ – also known as Messerschmitt Me-262, this was the first jet fighter in the world to be pushed into service, back in 1944.

The huge factory was designed based on a basic module made of a reinforced concrete arch, some 250 ft open, 100 ft tall and 10 to 15 ft thick. This item was to be built on site and partly buried under ground level. Twelve such modules were needed for the complete hangar, with a total intended length of the factory of around 1.200 ft. Of the planned twelve sections, seven were actually built between mid-1944 and the end of the war.

Despite the intended scope was that of hiding the factory to protect it from aerial reconnaissance, due to the size of the construction works the object was reportedly spotted by US aircraft, but not attacked. Actually, the special construction was tested against explosives by the US Army after the war, resulting in the collapse of all modules except one, which is still standing today besides the pretty sizable relics of the others.

The site is not actively guarded, but it is located in a regional nature preserve, so access is through a nice walk in the trees. Once next to the hangar you can find multiple access points.

Close to the main arch, the only one still standing, it is possible to find an explanatory panel in German only. It commemorates also the forced laborers from the nearby concentration camps, who had to take part substantially in the construction works.

Walking under the arch is at your own risk, cause despite the bulky appearance of the structure, smaller pieces of concrete are hanging from from the ceiling. However, a walk inside will give you the most striking impression of the size of the hangar.

Just nearby the remaining module to the west you can find a walkable, half interred bunker, likely with a technical function which is today hard to imagine.

The module still standing today is the westernmost of the hangar, so walking east you will have the chance to step on the roof of the demolished modules. A number of thick iron rods can be spot at ground level.

Walking along the former southern side of the hangar, you can spot a deep well, probably part of the construction strategy. It may have been used to take out the gravel from beneath the base of the arches to lower them to a rest position on more compact ground.

Along the same side you can find a way to walk below the fallen structure. You can also get a view of the edge of one of the modules.

The eastern end of the complex is probably the most hazardous, cause you find an unprotected concrete cliff a good 10 ft high, constituted by the edge of a fallen module.

All in all, the place is a nice example of the undeniable structural design abilities of the German military, really interesting to visit both from a technical viewpoint and as a witness of the utopian visions of the Nazis, which unfortunately cost the lives of many.

Getting there and moving around

Reaching the trail-head is very easy by car. Leaving Mühldorf am Inn for Waldkraiburg along the road St2352, about 0.5 miles south of the crossing with St2550 you will find a sizable gravel factory to your right, preceded by an unpaved road taking west in the trees. You can park on the unpaved road on the northern side of the factory – probably a heir of the original factory built to feed the construction works of the hangar.

From there, you should take the unpaved trail into the trees, closed to vehicle traffic. It is another 0.5 miles to the site, on a flat and easy trail. A quick scan of the Google map will allow you to plan the trip. The place is not remote, cell phones work and you may use a virtual map to get oriented on site. Visiting might take about 2 hours for a very interested subject, including the trip from the parking and back, plus all time needed for pictures .

Hitler’s Wonder Weapons in Northern France

Following the end of the Battle of Britain, mainly fought in the air in summer-fall 1940, the plans of the Axis for an invasion of Britain were halted and progressively updated and reconfigured. The successful invasion of Holland, Belgium and Northern France had led to a stabilization of the border of the Axis territory on the Atlantic coast of Europe earlier in 1940. Since then and until the counter-invasion by the Allied troops in June 1944, the military command of Germany decided for the fortification of the coast with the Atlantic Wall, a series of naval gun batteries, ammo storages, barracks, radar stations, command and communication centers, and everything else that was needed to detect and contrast an attack from the West, both from the sea and from the air.

But the coast of the Atlantic was not considered only as a border line to be defended. Some large-caliber cannons of the Atlantic Wall built in the region of Calais on the narrowest sector of the English Channel, were capable of hitting targets on British mainland. Furthermore, many port towns on the cost of France were converted into military ports from where the Kriegsmarine operated regularly with various material, including the famed underwater U-Boot forces, running offensive missions against all sorts of Allied ships in various sectors of the North Sea and the Atlantic ocean. Airbases were routinely operated in the regions of Northern France, Belgium and Holland both for bombing raids over Britain and later for fighting missions in defense of the occupied and the innermost territories of the Reich from the Allied bombing runs. With the help of the US, these began to systematically target the Axis in 1943, operating from Britain.

Finally, the newest and most advanced conventionally armed weapons of WWII started to be operated from the coastal area in 1944 by the German armed forces. The famous ‘Retaliation Weapons’, or ‘Vergeltungswaffen’ in German – from which the famous abbreviation ‘V’ of the V-1, V-2 and V-3 – suffered from limited range, and so had to be launched from close enough to their intended target – Britain, by design. Today some relics of the launch sites and some buildings connected with the deployment of such ordnance can be visited when touring the area of the Pas-de-Calais, the northernmost province of France.

The following photographs, taken in summer 2016, portray four notable sites of the kind in that region.

Navigate this post – Click on links to scroll

Sights

V-1 – Ardouval

Since 1943 new weapons enriched the arsenal of the German armed forces. The famous V-1, manufactured as Fieseler-103, reached operational readiness and began to be deployed that year. This relatively simple, subsonic, air-breathing – i.e. non-rocket-propelled – flying bomb, while not very accurate, could be deadly against large target cities like London. Its limited range forced deployment in the occupied territories closest to Britain.

Many launch bases were prepared in Northern France, from where Southern England was well within range. The V-1 was used only after the D-Day – the first registered operative launch was on June 13th, 1944, against Britain. By the end of Summer 1944 the Allied had pushed the Germans roughly back to the region of the Ardennes in Northeastern France, on the border with Belgium. Consequently, all bases in Northwestern France were silenced. Later in the war, V-1 were still launched against liberated Belgium and central England, from more inland and further north bases by the retreating German forces. Total launched V-1 were actually in the order of the tens of thousands.

The Ardouval site is possibly the only V-1 site officially opened to the public in France. It is an open-air museum with no fences, so it is open h24 every day of the year. The site was severely hit before by Allied air raids before it could enter service, so no flying bomb was ever launched from it. Actually, the bomb craters can be clearly spotted in the trees all around. Going far from the paved walkways is not advised due to danger of unexploded ordnance.

The installation is rather extensive, and traces of some original buildings and service roads remain to this day. Among them a concrete water basin, a generator building, a building with a concrete arch for aligning navigation instruments prior to the launch.

Two curved trails from the V-1 body storage to the operational buildings and launch ramp can be spotted. The launch ramp was reconstructed, but just besides you can see the launch observation bunker, with a slot for visual checking the launch from very close to the lower end of the inclined ramp.

Barely recognizable ruins of other buildings can be spotted as well. Touring the place is not complicated, thanks to an explanatory panel close to the parking. It is advisable to take a picture of it with your phone, to be sure to see everything the site has to offer. Time required is about 45 min.

Getting there and moving around

The site of Ardouval (Val Ygot) is located close to the town of Ardouval and Pommeréval. It can be easily reached by car from the latter, less than 2 miles from the town center, driving west on the D99. Large free parking on site.

V-2 – Watten & Wizernes

Much more advanced than V-1, the V-2 was the first operational rocket in the world. Invented by the team of Wernher von Braun and tested in Peenemünde, on the border between today’s Germany and Poland, this liquid-propelled rocket came in the latest stage of WWII. The production totalled around 5000 units, and about 3100 were actually launched during the war, basically only from mobile launch platforms. Targets were mainly Belgium and Britain, but the first successful launch took place against Paris in September 1944. As for the V-1, range was among the weaknesses of the design, so that a deployment close to the Atlantic coast was necessary for targeting Britain from mainland Europe.

Mobile gantries were well designed and allowed a relatively fast re-deployment, a critical feature in the last stage of the war when the frontline was moving eastward at fast pace. Despite that, Hitler’s personal preference was with huge, autonomous, fixed launch bases, for which design and construction work began soon after the occupation of Northern France.

Two sites were created. The first was close to Watten, in the forest of Eperlecques – about 40 miles from the coast to the south-east of Calais – and was codenamed ‘Kraftwerk Nordwest’. Work on this monstrous bunker – probably the largest you will ever see from this age – started in early 1943 in a forest, at ground level and with little natural defences.

This installation was designed for the assembly of V-2 rockets arriving by train, and for supplying them with oxygen prepared in place in a dedicated branch of this bunker-factory. The intended role of this installation was the creation of a ‘rocket revolver’, capable of launching rockets at a frequency of 1.5 per hour, 24 hours a day. The Allies did not overlook the potential strategic relevance of the site and bombed it repeatedly. During a raid carried out by US forces in summer 1943 the site still under construction was seriously damaged. Since then it was decided to turn it into a liquid oxygen production factory for supplying other launch sites. Soon after the disembarkment, the place was finally abandoned after being hit by Tallboy bombs by the British. After capture in September 1944 it was decided to further demolish it by testing several new ordnance against a target so hard to crack.

The site is open as a regular museum, which can be visited on self-guided tours. A trail in the trees leads you to the main bunker, the tallest part of which can be entered. A V-2 mockup allows you to appreciate the proportions of the building. Some of the tunnels can be seen from the outside.

Also in place are a V-1 launch ramp, cannons and vehicles. Time required for visiting may vary between about 30 minutes to more than 1 hour depending on your level of interest.

The second site was built starting mid-1943 close to Wizernes, and not far from the previous site in Watten. This was codenamed ‘Schotterwerk Nordwest’, and it was intended for the same basic scope of the other, but it had also to be built to avoid heavy damage from air-dropped bombs. The location was extremely favorable, making use of a former quarry, with tunneling in the body of a U-shaped hill. A distinctive feature still remaining today is the concrete dome covering part of the site. The place was stricken with usual and Tallboy bombs after the D-Day. This caused the collapse of the entrances to the tunnel system, and of the side of the hill. The dome moved and banked to on side, but notably it did not break apart.

The place is open as a major documentation center. Besides the usual IMAX theatre in a building close to the parking, you can visit on a self-guided tour both the tunnels in the side of the hill and the area below the concrete dome – it can be incredibly hot and suffocating there, where it’s cold in the tunnels. You can find here much information about the history of the site and more in general of the deployment of the V-1 and V-2 in the area. A complete visit without the IMAX may take 45 minute to 1.5 hours depending on your interests.

Getting there and moving around

Both sites are easily reachable by car. The site of Watten is located is about two miles west of the town. You can reach it driving west on the D207 from the crossing between D207 and D300. A road called Rue des Sarts takes to the right after about .6 mile. The local name of the place is ‘Le Blockhaus d’Eperlecques’.

The site of Wizernes is located on the D210 about 1 mile south of Wizernes. The local name is ‘La Coupole’ – the Dome’.

Both sites are clearly signed.

V-3 – Mimoyecques

The hatred against the indomitable British enemy reached a pinnacle with the deployment of the V-3, reportedly Hitler’s favorite, a supercannon capable of shelling London from a distance of around 100 miles. The installation in Mimoyecques, close to Cap-Gris-Nez, about 8 miles southwest of Calais, was single-targeted against the ‘symbol town’ of London, for the cannon could not be oriented – it was built inside a hill and pointed upwards in a fixed attitude. The design was based on the older idea of multiple-charged shells, i.e. shells which were accelerated gradually to a very high target speed while running along an exceptionally long (430 ft) barrel. The site in Mimoyecques, codenamed ‘Bauvorhaben 711’, by design accommodated 25 such barrels, allowing the battery to shoot at the very high rate of 10 shells per minute, all the day round. The tunnel was designed to allow a train entering it.

Work on the site began in summer 1943, but the site never reached completion and was severely hit in summer 1944 by Allied bombing raids. President Kennedy’s elder brother reportedly died in an accident on one of them. It is noteworthy that the novelty and originality of the design disoriented Allied intelligence, who did not understand the role of the installation before capture in September 1944.

The concept of supercannons, albeit never provedly succesful from an operational viewpoint, was destined to emerge again in recent history, with a similar installation proposed by Iraqi dictator Saddam Hussein and designed with the help of a Canadian company – its manager being reportedly killed by the Mossad to hamper realization.

Together with the other ‘V sites’, Mimoyecques was almost completely demolished in order to avoid any further strategic use. It is reported that Winston Churchill in person pushed for this, to the aim of preventing the yet-to-be-established government of France from any action against Britain – some speculate that what the Prime Minister likely feared was the establishment of Communist rule in France.

This is site is not so famous as the V-2 sites, and not similarly ‘institutional’, yet there are opening times. You can go on a self-guided tour of the tunnels, where you can find many explanatory panels, as well as a reconstruction of one of the barrels. It’s always too warm for me, but I must say this time it was incredibly cold inside… The visit may take 30-45 minutes. Guided tours are available in French.

On the outside, just besides the tunnel entrance you can find a steel plate once on top of the site armouring the outlets of the barrels. The concrete construction on top of the place lies on a private property. I could only take one pic before being forced to withdraw…

 Getting there and moving around

The area is very nice, with the lovely Cap-Gris-Nez and Cap-Blanc-Nez a few miles away. The site can be reached on the D249 between the small towns of Bainghen and Landretun-le-Nord. Large free parking on site.